Consult Factory for complete catalog with selected side adapters.

	Model No.	Maximum Pressure*	Port	Cv	Male or Female NPT	Single-Ferrule Tube	Male or Female M/P	Male or Female H/P
	K34	3,000 PSI 210 bar	0.250" (6.4mm)	1.40	1/8" - 1/2"
	K316	3,000 PSI 210 bar	1.000" (25.4mm)	36.00	3/4" - 1-1/2"
	K63	6,000 PSI 410 bar	0.187" (4.7mm)	0.75	1/8" - 1/2"	1/8" - 1/2"	1/4" - 9/16"	1/4" - 9/16"
	K103	10,000 PSI 690 bar	0.187" (4.7mm)	0.75	1/8" - 1/2"	1/8" - 1/2"	1/4" - 9/16"	1/4" - 9/16"
	K104	10,000 PSI 690 bar	0.250" (6.4mm)	1.40	1/8" - 1/2"	1/8" - 1/2"	1/4" - 9/16"	1/4" - 9/16"
	K106	10,000 PSI 690 bar	0.375" (9.5mm)	3.40	1/8" - 1"	1/4" - 1/2"	1/4" - 1"	1/4" - 9/16"
	K108	10,000 PSI 690 bar	0.500" (12.7mm)	10.00	3/8" - 1-1/2"	3/8" - 1/2"	3/8" - 1"	1/4" - 9/16"
	K204	20,000 PSI 1380 bar	0.250" (6.4mm)	1.40	1/8" - 1/2"	1/8" - 1/2"	1/4" - 9/16"	1/4" - 9/16"
	K206	20,000 PSI 1380 bar	0.375" (9.5mm)	3.40	1/8" - 1"	1/4" - 1/2"	1/4" - 1"	1/4" - 9/16"
* The maximum allowable working pressure (MAWP) of the valve shall not exceed the MAWP of the valve series or the selected connection, whichever is less.

	Spring Return Alumium Housing			Spring Return Stainless Housing
Valve Model	Actuator Model	Max Air Consumption (per stroke)	Required Air Pressure	Actuator Model	Max Air Consumption (per stroke)	Required Air Pressure
K34	RC05SR	51.0 cu in 836 cc	80 PSI 5.5 bar	RA10SRSS	9.0 cu in 147 cc	70 PSI 4.8 bar
K63	RC05SR	51.0 cu in 836 cc	80 PSI 5.5 bar	RA10SRSS	9.0 cu in 147 cc	70 PSI 4.8 bar
K103	RC05SR	51.0 cu in 836 cc	80 PSI 5.5 bar	RA10SRSS	9.0 cu in 147 cc	75 PSI 5.2 bar
K104	RC10SR	51.0 cu in 836 cc	80 PSI 5.5 bar	RA10SRSS	9.0 cu in 147 cc	75 PSI 5.2 bar
K106	RC10SR	51.0 cu in 836 cc	80 PSI 5.5 bar	RA10SRSS	9.0 cu in 147 cc	80 PSI 5.5 bar
K108	RC30SR	122.0 cu in 1999 cc	80 PSI 5.5 bar	RA30SRSS	52.0 cu in 852 cc	80 PSI 5.5 bar
K204	RC10SR	51.0 cu in 836 cc	80 PSI 5.5 bar	RA10SRSS	9.0 cu in 147 cc	85 PSI 5.9 bar
K206	RC10SR	51.0 cu in 836 cc	80 PSI 5.5 bar	RA10SRSS	9.0 cu in 147 cc	90 PSI 6.2 bar

	Double-Acting Aluminum Housing			Double-Acting Stainless Housing			90 Uni-Directional Electric
Valve Model	Actuator Model	Max Air Consumption (per stroke)	Required Air Pressure	Actuator Model	Max Air Consumption (per stroke)	Required Air Pressure	Actuator Model 110/120 VAC	Actuator Model 210/220 VAC
K34	RC05DA	51.0 cu in 836 cc	80 PSI 5.5 bar	RA10DASS	9.0 cu in 147 cc	15 PSI 1.0 bar	WE110	WE220
K63	RC05DA	51.0 cu in 836 cc	80 PSI 5.5 bar	RA10DASS	9.0 cu in 147 cc	15 PSI 1.0 bar	WE110	WE220
K103	RC05DA	51.0 cu in 836 cc	80 PSI 5.5 bar	RA10DASS	9.0 cu in 147 cc	20 PSI 1.4 bar	WE110	WE220
K104	RC05DA	51.0 cu in 836 cc	80 PSI 5.5 bar	RA10DASS	9.0 cu in 147 cc	20 PSI 1.4 bar	WE110	WE220
K106	RC05DA	51.0 cu in 836 cc	80 PSI 5.5 bar	RA10DASS	9.0 cu in 147 cc	30 PSI 2.1 bar	WE110	WE220
K108	RC20DA	73.0 cu in 1196 cc	80 PSI 5.5 bar	RA20DASS	19.5 cu in 320 cc	50 PSI 3.4 bar	WHE110	WHE220
K204	RC05DA	51.0 cu in 836 cc	80 PSI 5.5 bar	RA10DASS	9.0 cu in 147 cc	30 PSI 2.1 bar	WE110	WE220
K206	RC05DA	51.0 cu in 836 cc	80 PSI 5.5 bar	RA10DASS	9.0 cu in 147 cc	40 PSI 2.8 bar	WE110	WE220

]]> Ball Valves 3-Way Diverting Ball Valves 3-Way Valves for Diverting Service to 20,000 PSI (1,380 bar)

Consult Factory for complete catalog with selected side adapters.

	Model No.	Maximum Pressure*	Port	Cv	Male or Female NPT	Single-Ferrule Tube	Male or Female M/P	Male or Female H/P
	3DVK34	3000 PSI 210 bar	0.250" (6.4mm)	1.00	1/8" - 1/2"
	3DVK63	6,000 PSI 410 bar	0.187" (4.7mm)	0.56	1/8" - 1/2"	1/8" - 1/2"	1/4" - 9/16"	1/4" - 9/16"
	3DVK93	10,000 PSI 690 bar	0.187" (4.7mm)	0.56	1/8" - 1/2"	1/8" - 1/2"	1/4" - 9/16"	1/4" - 9/16"
	3DVK106	10,000 PSI 690 bar	0.375" (9.5mm)	2.40	1/8" - 1"	1/4" - 1/2"	1/4" - 1"	1/4" - 9/16"
	3DVK108	10,000 PSI 690 bar	0.500" (12.7mm)	5.00	3/8" - 1-1/2"	3/8" - 1/2"	3/8" - 1"	1/4" - 9/16"
	3DVK123	10,000 PSI 690 bar	0.187" (4.7mm)	0.56	1/8" - 1/2"	1/8" - 1/2"	1/4" - 9/16"	1/4" - 9/16"
	3DVK203	20,000 PSI 1380 bar	0.187" (4.7mm)	0.56	1/8" - 1/2"		1/4" - 9/16"	1/4" - 9/16"
	3DVK206	20,000 PSI 1380 bar	0.375" (9.5mm)	2.40	1/8" - 1"	1/4" - 1/2"	1/4" - 1"	1/4" - 9/16"
* The maximum allowable working pressure (MAWP) of the valve shall not exceed the MAWP of the valve series or the selected connection, whichever is less.

	Spring Return Alumium Housing			Spring Return Stainless Housing
Valve Model	Actuator Model	Max Air Consumption (per stroke)	Required Air Pressure	Actuator Model	Max Air Consumption (per stroke)	Required Air Pressure
K34	RC05SR	51.0 cu in 836 cc	80 PSI 5.5 bar	RA10SRSS	9.0 cu in 147 cc	70 PSI 4.8 bar
K63	RC05SR	51.0 cu in 836 cc	80 PSI 5.5 bar	RA10SRSS	9.0 cu in 147 cc	70 PSI 4.8 bar
K103	RC05SR	51.0 cu in 836 cc	80 PSI 5.5 bar	RA10SRSS	9.0 cu in 147 cc	75 PSI 5.2 bar
K104	RC10SR	51.0 cu in 836 cc	80 PSI 5.5 bar	RA10SRSS	9.0 cu in 147 cc	75 PSI 5.2 bar
K106	RC10SR	51.0 cu in 836 cc	80 PSI 5.5 bar	RA10SRSS	9.0 cu in 147 cc	80 PSI 5.5 bar
K108	RC30SR	122.0 cu in 1999 cc	80 PSI 5.5 bar	RA30SRSS	52.0 cu in 852 cc	80 PSI 5.5 bar
K204	RC10SR	51.0 cu in 836 cc	80 PSI 5.5 bar	RA10SRSS	9.0 cu in 147 cc	85 PSI 5.9 bar
K206	RC10SR	51.0 cu in 836 cc	80 PSI 5.5 bar	RA10SRSS	9.0 cu in 147 cc	90 PSI 6.2 bar

	Double-Acting Alumium Housing			Double-Acting Stainless Housing
Valve Model	Actuator Model	Max Air Consumption (per stroke)	Required Air Pressure	Actuator Model	Max Air Consumption (per stroke)	Required Air Pressure
3DVK34	RC05DA	51.0 cu in 836 cc	80 PSI 5.5 bar	RA10DASS	9.0 cu in 147 cc	20 PSI 1.4 bar
3DVK63	RC05DA	51.0 cu in 836 cc	80 PSI 5.5 bar	RA10DASS	9.0 cu in 147 cc	20 PSI 1.4 bar
3DVK93	RC05DA	51.0 cu in 836 cc	80 PSI 5.5 bar	RA10DASS	9.0 cu in 147 cc	20 PSI 1.4 bar
3DVK106	RC20DA	73.0 cu in 1196 cc	80 PSI 5.5 bar	RA20DASS	19.5 cu in 320 cc	40 PSI 2.8 bar
3DVK108	RC30DA	266.0 cu in 4359 cc	80 PSI 5.5 bar	RA20DASS	19.5 cu in 320 cc	60 PSI 4.1 bar
3DVK123	RC05DA	51.0 cu in 836 cc	80 PSI 5.5 bar	RA10DASS	9.0 cu in 147 cc	30 PSI 2.1 bar
3DVK203	RC10DA	61.0 cu in 1000 cc	80 PSI 5.5 bar	RA10DASS	9.0 cu in 147 cc	50 PSI 3.4 bar
3DVK206	RC30DA	226.0 cu in 3703 cc	80 PSI 5.5 bar	RA20DASS	19.5 cu in 320 cc	50 PSI 3.4 bar

]]> Ball Valves 4-Way Ball Valves for Crossover Service 4-Way Valves for Crossover Service to 10,000 PSI (690 bar)

Consult Factory for complete catalog with selected side adapters.

	Model No.	Maximum Pressure*	Port	Cv	Male or Female NPT	Single-Ferrule Tube	Male or Female M/P	Male or Female H/P
	4K103	10,000 PSI 690 bar	0.187" (4.7mm)	0.56	1/8" - 1/2"	1/8" - 1/2"	1/4" - 9/16"	1/4" - 9/16"
	4K106	10,000 PSI 690 bar	0.375" (9.5mm)	2.40	1/8" - 1"	1/4" - 1/2"	1/4" - 1"	1/4" - 9/16"
* The maximum allowable working pressure (MAWP) of the valve shall not exceed the MAWP of the valve series or the selected connection, whichever is less.

]]> Ball Valves 5-Way Ball Valves for Switching Service 5-Way Valves for Switching Service to 10,000 PSI (690 bar)

Consult Factory for complete catalog with selected side adapters.

	Model No.	Maximum Pressure*	Port	Cv	Male or Female NPT	Single-Ferrule Tube	Male or Female M/P	Male or Female H/P
	5K103	10,000 PSI 690 bar	0.187" (4.7mm)	0.56	1/8" - 1/2"	1/8" - 1/2"	1/4" - 9/16"	1/4" - 9/16"
	5K106	10,000 PSI 690 bar	0.375" (9.5mm)	2.40	1/8" - 1"	1/4" - 1/2"	1/4" - 1"	1/4" - 9/16"
* The maximum allowable working pressure (MAWP) of the valve shall not exceed the MAWP of the valve series or the selected connection, whichever is less.

]]> Ball Valves 2-Way Trunnion Ball Valves 2-Way Trunnion Valves for Service to 20,000 PSI (1,380 bar)

BuTech offers a two-way trunnion valve for severe high-cycle applications. These valves are constructed of the same materials as our three-way diverting and switching valves and are designed to operate in temperatures from -20°F to 400°F (-28°C to 204°C).

	Model No.	Maximum Pressure*	Port	Cv
	3K341	3,000 PSI 210 bar	0.250" (6.4mm)	1.40
	3K631	6,000 PSI 410 bar	0.187" (4.7mm)	0.75
	3K931	10,000 PSI 690 bar	0.187" (4.7mm)	0.75
	3K1061	10,000 PSI 690 bar	0.375" (9.5mm)	3.40
	3K1081	10,000 PSI 690 bar	0.500" (12.7mm)	10.00
	3K1231	12,000 PSI 830 bar	0.187" (4.7mm)	0.75
	3K2031	20,000 PSI 1380 bar	0.187" (4.7mm)	0.75
	3K2061	20,000 PSI 1380 bar	0.375" (9.5mm)	3.40

Standard Features

• Pressures to 20,000 PSI (1,380 bar) at 72°F (22°C)
• Pressure loaded seats assure positive sealing
• Blowout-proof stem provides maximum safety
• Choice of replaceable connections for installation versatility
• Double-ended trunnion mounted ball
• Reinforced PEEK trunnion bearings and high-temperature o-rings for temperatures up to 550°F (288°C)
• Bi-directional flow capabilities

]]> Ball Valves H-Series Ball Valves H-Series Ball Valves for Service to 6,000 PSI (410 bar)

BuTech H-Series ball valves are available in female NPT connections. They are available with special seal materials and may be manufactured from any machinable alloy for extreme applications. (Note: H-Series valves are not available with remote actuators.)

	Catalog Number	Connection	Port	Cv
	H64	3/8" FNPT	0.250" (9.5mm)	1.40
	H66	1/2" FNPT	0.375" (12.7mm)	3.40
	H68	3/4" FNPT	0.500" (19.0mm)	10.00

Standard Features

• Pressures to 6,000 PSI (410 bar) at 72°F (22°C)
• Pressure loaded seats assure positive sealing
• Blowout-proof stem and ball provide maximum safety
• Straight-through flow path minimizes pressure drop
• Quarter-turn operation accommodates quick open-and-close needs
• Flow indicating handle indicates valve position at a glance
• Bi-directional flow capabilities

]]> BuTech Pipe Valves and Equipment SFPV/FPV Needle Valves Needle Valves for Service to 15,000 PSI (1,030 bar)

• Non-rotating stem prevents galling and scoring
• Four stem styles: Vee, Regulating, Metering, and Micro-Metering
• 17-4PH stem for longer service life - 316 wetted parts are also available by specifying option 316 WP
• Glass-filled Teflon packing for temperatures to 600°F (315°C)
• Integral through holes for bracket mounting. A panel-mounting option is also available
• Positive gland locking device

Standard Materials of Construction

Standard materials of construction include 316 cold-worked stainless steel, 17-4PH, Ampco 45, and glass-filled Teflon. All BuTech equipment may also be produced in any machinable alloy. Some of the more common exotic materials used are:
Hastelloy™
Inconel™
Titanium
Monel 400™

Connection	MAWP+	Cv*	Stem Style	2-way Straight	2-way Angle	3-way Two on Pressure	3-way One on Pressure
1/8"	15,000 PSI 1,030 bar	0.65	Vee Reg	SFPV21V SFPV21R	SFPV22V SFPV22R	SFPV23V SFPV23R	SFPV24V SFPV24R
1/4"	15,000 PSI 1,030 bar	0.75	Vee Reg	SFPV41V SFPV41R	SFPV42V SFPV42R	SFPV43V SFPV43R	SFPV44V SFPV44R
3/8"	15,000 PSI 1,030 bar	1.75	Vee Reg	SFPV61V SFPV61R	SFPV62V SPFV62R	SFPV63V SFPV63R	SFPV64V SFPV64R
1/2"	15,000 PSI 1,030 bar	1.75	Vee Reg	SFPV81V SFPV81R	SFPV82V SFPV82R	SFPV83V SFPV83R	SFPV84V SFPV84R
3/4"	10,000 PSI 690 bar	3.40	Vee Reg	FPV121V FPV121R	FPV122V FPV122R	FPV123V FPV123R	FPV124V FPV124R
1"	10,000 PSI 690 bar	3.40	Vee Reg	FPV161V FPV161R	FPV162V FPV162R	FPV163V FPV163R	FPV164V FPV164R

Connection	MAWP+	Cv*	Stem Style	2-stem Manifold	2-way Angle Replaceable Seat	Metering	Micro-Metering
1/8"	15,000 PSI 1,030 bar	0.65	Vee Reg	SFPV25V SFPV25R	SFPV26V SFPV26R	SFPMV26V	SFPMMV26V
1/4"	15,000 PSI 1,030 bar	0.75	Vee Reg	SFPV45V SFPV45R	SFPV46V SFPV46R	SFPMV46V	SFPMMV46V
3/8"	15,000 PSI 1,030 bar	1.75	Vee Reg	SFPV65V SFPV65R	SFPV66V SFPV66R	SFPMV66V	SFPMMV66V
1/2"	15,000 PSI 1,030 bar	1.75	Vee Reg	SFPV85V SFPV85R	SFPV86V SFPV86R	---	---
3/4"	10,000 PSI 690 bar	3.40	Vee Reg	FPV125V PFV125R	FPV126V FPV126R	---	---
1"	10,000 PSI 690 bar	3.40	Vee Reg	FPV165V FPV165R	FPV166V FPV166R	---	---

* Cv values listed are for 2-way straight pattern valves. For 2-way angle valves, increase Cv value by 50%.
+ Maximum pressure rating at 72°F (22°C) of the valve only. Working pressure is determined by the pressure rating of the pipe.

]]> BuTech Pipe Valves and Equipment DHP Needle Valves DHP Valves for Service to 15,000 PSI (1,030 bar)

Connection	MAWP+	Cv*	2-way Straight, Female Ports	2-way Straight, Male Inlet/Female Outlet	2-way Angle, Male Inlet/Female Outlet	Block & Bleed/Gauge, Male Inlet/Female Outlet	Extension, Male Inlet/Female Outlet
1/8"	15,000 PSI 1,030 bar	0.60	DHP2F	DHP2MF	DHP22MF	DHP27	DHP29
1/4"	15,000 PSI 1,030 bar	0.73	DHP4F	DHP4MF	DHP42MF	DHP47	DHP49
3/8"	15,000 PSI 1,030 bar	0.73	DHP6F	DHP6MF	DHP62MF	DHP67	DHP69
1/2"	15,000 PSI 1,030 bar	0.73	DHP8F	DHP8MF	DHP82MF	DHP87	DHP89
3/4"	10,000 PSI 690 bar	5.20	DHP12F	DHP12MF	150V Series Needle Valves and Equipment for Service to 150,000 PSI (10,340 bar) Tube OD MAWP+ Cv* Stem Style 2-way Straight 2-way Angle 3-way Two on Pressure 5/16" 150,000 PSI 10,340 bar 0.27 Vee Reg 150V51V 150V51R 150V52V 150V52R 150V53V 150V53R * Cv values listed are for 2-way straight pattern valves. For 2-way angle valves, increase Cv value by 50%. + Maximum pressure rating at 72°F (22°C) of the valve only. Working pressure is determined by the pressure rating of the pipe. Tube OD MAWP+ Elbow Tee Cross Coupling Replaceable Seat Coupling Bulkhead Coupling 5/16" 150,000 PSI 10,340 bar 150L5 150T5 150X5 150F5 150UF5 150BF5 Tube OD MAWP+ Gland Collar Plug Cap 5/16" 150,000 PSI 10,340 bar 150G5 150C5 150P5 150CA5 Tubing is available in standard 20 to 24 foot length (6 to 7 meters); however, longer lengths are available on request. Tube OD I.D. Catalog Number 5/16" 0.063" (1.6mm) 150-063-316 Nipples are stocked pre-cut coned and threaded in lengths up to 12" (305mm). Nipples also can be purchased in any custom length. Length Tube OD 4.00" 6.00" 8.00" 10.00" 12.00" 5/16" 150N554-* 150N556-* 150N558-* 150N5510-* 150N5512-* * Complete catalog number by adding suffix 316 for 316 stainless steel, or suffix 304 for 304 stainless steel. gn=center>DHP122MF	----	----
1"	10,000 PSI 690 bar	5.20	DHP16F	DHP16MF	DHP162MF	----	----

* Cv values listed are for 2-way straight pattern valves. For 2-way angle valves, increase Cv value by 50%.
+ Maximum pressure rating at 72°F (22°C) of the valve only. Working pressure is determined by the pressure rating of the pipe. ]]> BuTech Pipe Valves and Equipment Replaceable Seat Needle Valves Replaceable Seat Valves for Service to 15,000 PSI (1,030 bar)

• Designed to permit replacement of the seat without removing the valve from the system
• Non-rotating stem
• Shut-off and metering service capability
• Glass-filled Teflon packing
• Soft seat available in PEEK, Teflon, Torlon, Delrin,UHMWPE, and others
• Ball seat available in 316SS, Stellite, brass, and other machinable materials

Connection	MAWP+	Cv*	Soft Seat	Ball Seat
1/8"	15,000 PSI 1,030 bar	0.65	JSV-P2	JBV-P2
1/4"	15,000 PSI 1,030 bar	0.75	JSV-P4	JBV-P4
3/8"	15,000 PSI 1,030 bar	1.75	JSV-P6	JBV-P6
1/2"	15,000 PSI 1,030 bar	1.75	JSV-P8	JBV-P8

* Cv values listed are for 2-way straight pattern valves. For 2-way angle valves, increase Cv value by 50%.
+ Maximum pressure rating at 72°F (22°C) of the valve only. Working pressure is determined by the pressure rating of the pipe.

]]> BuTech Pipe Valves and Equipment Pipe Equipment Pipe Adapters and Pipe Equipment for Service to 15,000 PSI (1,030 bar)

Standard material of construction for pipe adapters is 316SS.

	1/8" 15,000 PSI (1,030 bar)	1/4" 15,000 PSI (1,030 bar)	3/8" 15,000 PSI (1,030 bar)	1/2" 15,000 PSI (1,030 bar)	3/4" 10,000 PSI (690 bar)	1" 10,000 PSI (690 bar)
1/8"	MA2P2P	MA2P4P	MA2P6P	MA2P8P	MA2P12P	MA2P16P
1/4"	MA2P4P	MA4P4P	MA4P6P	MA4P8P	MA4P12P	MA4P16P
3/8"	MA2P6P	MA4P6P	MA6P6P	MA6P8P	MA6P12P	MA6P16P
1/2"	MA2P8P	MA4P8P	MA6P8P	MA8P8P	MA8P12P	MA8P16P
3/4"	MA2P12P	MA4P12P	MA6P12P	MA8P12P	MA12P12P	MA12P16P
1"	MA2P16P	MA4P16P	MA6P16P	MA8P16P	MA12P16P	MA16P16P

Tube Connection	MAWP+	Female Elbow	Street Elbow	Male Elbow	Coupling	Bulkhead Coupling	Zero-Clearance Union
1/8" NPT	15,000 PSI 1,030 bar	FPL2	MSPL2	MPL2	FPF2	FPBF2	FPUF2
1/4" NPT	15,000 PSI 1,030 bar	FPL4	MSPL4	MPL4	FPF4	FPBF4	FPUF4
3/8" NPT	15,000 PSI 1,030 bar	FPL6	MSPL6	MPL6	FPF6	FPBF6	FPUF6
1/2" NPT	15,000 PSI 1,030 bar	FPL8	MSPL8	MPL8	FPF8	FPBF8	FPUF8
3/4" NPT	10,000 PSI 690 bar	FPL12	MSPL12	MPL12	FPF12	FPBF12	FPUF12
1" NPT	10,000 PSI 690 bar	FPL16	MSPL16	MPL16	FPF16	FPBF16	----

Connection	MAWP+	Female Tee	Male Tee	Male Street Tee	Male Branch Tee	Female Cross
1/8" NPT	15,000 PSI 1,030 bar	FPT2	MPT2	MSPT2	MBPT2	FPX2
1/4" NPT	15,000 PSI 1,030 bar	FPT4	MPT4	MSPT4	MBPT4	FPX4
3/8" NPT	15,000 PSI 1,030 bar	FPT6	MPT6	MSPT6	MBPT6	FPX6
1/2" NPT	15,000 PSI 1,030 bar	FPT8	MPT8	MSPT8	MBPT8	FPX8
3/4" NPT	10,000 PSI 690 bar	FPT12	MPT12	MSPT12	MBPT12	FPX12
1" NPT	10,000 PSI 690 bar	FPT16	MPT16	MSPT16	MBPT16	FPX16

Standard o-ring material is Buna-N. Other materials available on request. Line filters available in nominal ratings of 0.5, 2, 5, 10, 20, 40 and 100 micron.
Cup filters available in nominal ratings of 5, 10, 20, 40 and 100 micron.

		Check Valves		Filters
Connection	MAWP+	Ball Type	O-ring Type	Line	Cup
1/8" NPT	15,000 PSI 1,030 bar	FPBC2	FPSC2	FPLF2	FPSCF2
1/4" NPT	15,000 PSI 1,030 bar	FPBC4	FPSC4	FPLF4	FPSCF4
3/8" NPT	15,000 PSI 1,030 bar	FPBC6	FPSC6	FPLF6	FPSCF6
1/2" NPT	15,000 PSI 1,030 bar	FPBC8	FPSC8	FPLF8	FPSCF8
3/4" NPT	10,000 PSI 690 bar	FPBC12	FPSC12	FPLF12	FPSCF12
1" NPT	10,000 PSI 690 bar	FPBC16	FPSC16	FPLF16	FPSCF16

Connection	MAWP+	Plug	Cap	Safety Head
1/8" NPT	15,000 PSI 1,030 bar	MPP2	FPCA2	FPSH2
1/4" NPT	15,000 PSI 1,030 bar	MPP4	FPCA4	FPSH4
3/8" NPT	15,000 PSI 1,030 bar	MPP6	FPCA6	FPSH6
1/2" NPT	15,000 PSI 1,030 bar	MPP8	FPCA8	FPSH8
3/4" NPT	10,000 PSI 690 bar	MPP12	FPCA12	FPSH12
1" NPT	10,000 PSI 690 bar	MPP16	FPCA16	FPSH16

+ Maximum pressure rating at 72°F (22°C) of the valve only. Working pressure is determined by the pressure rating of the pipe. ]]> Low Pressure Equipment – Compression Fittings SLPV Series Valves SLPV Series Valves for Service to 15,000 PSI (1,030 bar)

Tube OD	MAWP+	Cv*	Stem Style	2-way Straight	2-way Angle	3-way Two on Pressure	3-way One on Pressure
1/16"	15,000 PSI 1,030 bar	0.06	Vee Reg	SLPV11V SLPV11R	SLPV12V SLPV12R	SLPV13V SLPV13R	SLPV14V SLPV14R
1/8"	15,000 PSI 1,030 bar	0.12	Vee Reg	SLPV21V SLPV21R	SLPV22V SLPV22R	SLPV23V SLPV23R	SLPV24V SLPV24R
1/4"	11,500 PSI 790 bar	0.20	Vee Reg	SLPV41V SLPV41R	SLPV42V SLPV42R	SLPV43V SLPV43R	SLPV44V SLPV44R
3/8"	7,500 PSI 520 bar	0.20	Vee Reg	SLPV61V SLPV61R	SLPV62V SLPV62R	SLPV63V SLPV63R	SLPV64V SLPV64R
1/2"	5,500 PSI 380 bar	1.90	Vee Reg	SLPV81V SLPV81R	SLPV82V SLPV82R	SLPV83V SLPV83R	SLPV84V SLPV84R

Tube OD	MAWP+	Cv*	Stem Style	2-stem Manifold	2-way Angle Replaceable Seat	Metering	Micro-Metering
1/16"	15,000 PSI 1,030 bar	0.06	Vee Reg	SLPV15V SLPV15R	SLPV16V SLPV16R	SLPMV16V	SLPMMV16V
1/8"	15,000 PSI 1,030 bar	0.12	Vee Reg	SLPV25V SLPV25R	SLPV26V SLPV26R	SLPMV26V	SLPMMV26V
1/4"	11,500 PSI 790 bar	0.20	Vee Reg	SLPV45V SLPV45R	SLPV46V SLPV46R	SLPMV46V	SLPMMV46V
3/8"	7,500 PSI 520 bar	0.20	Vee Reg	SLPV65V SLPV65R	SLPV66V SLPV66R	SLPMV66V	SLPMMV66V
1/2"	5,500 PSI 380 bar	1.90	Vee Reg	SLPV85V SLPV85R	SLPV86V SLPV86R	-----	-----

* Cv values listed are for 2-way straight pattern valves. For 2-way angle valves, increase Cv value by 50%.
+ Maximum pressure rating at 72°F (22°C) of the valve only. Working pressure is determined by the pressure rating of the pipe.

]]> Low Pressure Equipment – Compression Fittings Low Pressure Equipment Low Pressure Equipment for Service to 15,000 PSI (1,030 bar)

Standard material of construction is 316 cold-worked stainless steel. Other materials are available on request. (Please consult Factory)

Tube OD	MAWP+	Elbow	Tee	Cross	Coupling	Bulkhead Coupling
1/16"	15,000 PSI 1,030 bar	LPL1	LPT1	LPX1	LPC1	LPBF1
1/8"	15,000 PSI 1,030 bar	LPL2	LPT2	LPX2	LPC2	LPBF2
1/4"	11,500 PSI 790 bar	LPL4	LPT4	LPX4	LPC4	LPBF4
3/8"	7,500 PSI 520 bar	LPL6	LPT6	LPX6	LPC6	LPBF6
1/2"	5,500 PSI 380 bar	LPL8	LPT8	LPX8	LPC8	LPBF8

All fittings are supplied complete with appropriate gland and ferrule.

		Check Valves		Filters
Tube OD	MAWP+	Ball Type	O-ring Type	Line	Cup
1/16"	15,000 PSI 1,030 bar	LPBC1	LPSC1	LPLF1	LPSCF1
1/8"	15,000 PSI 1,030 bar	LPBC2	LPSC2	LPLF2	LPSCF2
1/4"	11,500 PSI 790 bar	LPBC4	LPSC4	LPLF4	LPSCF4
3/8"	7,500 PSI 520 bar	LPBC6	LPSC6	LPLF6	LPSCF6
1/2"	5,500 PSI 380 bar	LPBC8	LPSC8	LPLF8	LPSCF8

Standard o-ring material is Buna-N. Other materials available on request.
Line filters available in nominal ratings of 0.5, 2, 5, 10, 20, 40 and 100 micron.
Cup filters available in nominal ratings of 5, 10, 20, 40 and 100 micron.

Tube OD	MAWP+	Gland	Ferrule	Plug	Cap	Safety Heads
1/16"	15,000 PSI 1,030 bar	LPG1	LPF1	LPP1	LPCA1	LPSH1
1/8"	15,000 PSI 1,030 bar	LPG2	LPF2	LPP2	LPCA2	LPSH2
1/4"	11,500 PSI 790 bar	SLPG4	LPF4	LPP4	LPCA4	LPSH4
3/8"	7,500 PSI 520 bar	SLPG6	LPF6	LPP6	LPCA6	LPSH6
1/2"	5,500 PSI 380 bar	LPG8	LPF8	LPP8	LPCA8	LPSH8

Tubing is available in standard 20 to 24 foot length (6 to 7 meters); however, longer lengths are available on request.

Tube OD	MAWP+	I.D.	Catalog Number
1/16"	15,000 PSI 1,030 bar	0.031" (0.8mm)	LP062-031-*
1/8"	15,000 PSI 1,030 bar	0.062" (1.6mm)	LP125-052-*
1/4"	11,500 PSI 790 bar	0.125" (3.2mm)	LP250-125-*
3/8"	7,500 PSI 520 bar	0.250" (6.4mm)	LP375-250-*
1/2"	7,000 PSI 480 bar	0.334" (8.5mm)	LP500-334-*
1/2"	5,500 PSI 380 bar	0.375" (9.5mm)	LP500-375-*

* Complete catalog number by adding suffix 316 for 316 stainless steel, or suffix 304 for 304 stainless steel.
+ MAWP listed is the maximum working pressure of the fitting. Working pressure is determined by the pressure rating of the tubing.

]]> Medium Pressure Equipment 20UV Series Needle Valves 20UV Series Needle Valves for Service to 20,000 PSI (1,380 bar)

Tube OD	MAWP+	Cv*	Stem Style	2-way Straight	2-way Angle	3-way Two on Pressure	3-way One on Pressure
1/4"	20,000 PSI 1,380 bar	0.31	Vee Reg	20UV41V 20UV41R	20UV42V 20UV42R	20UV43V 20UV43R	20UV44V 20UV44R
3/8"	20,000 PSI 1,380 bar	0.75	Vee Reg	20UV61V 20UV61R	20UV62V 20UV62R	20UV63V 20UV63R	20UV64R 20UV64V
9/16"	20,000 PSI 1,380 bar	1.75	Vee Reg	20UV91V 20UV91R	20UV92V 20UV92R	20UV93V 20UV93R	20UV94V 20UV94R
3/4"	20,000 PSI 1,380 bar	2.80	Vee Reg	20V121V 20V121R	20V122V 20V122R	20V123V 20V123R	20V124V 20V124R
1"	20,000 PSI 1,380 bar	5.20	Vee Reg	20V161V 20V161R	20V162V 20V162R	20V163V 20V163R	20V164V 20V164R

Tube OD	MAWP+	Cv*	Stem Style	2-stem Manifold	2-way Angle Replaceable Seat	Metering	Micro-Metering
1/4"	20,000 PSI 1,380 bar	0.31	Vee Reg	20UV45V 20UV45R	20UV46V 20UV46R	20MV46V	20MMV46V
3/8"	20,000 PSI 1,380 bar	0.75	Vee Reg	20UV65V 20UV65R	20UV66V 20UV66R	20MV66V	20MMV66V
9/16"	20,000 PSI 1,380 bar	1.75	Vee Reg	20UV95V 20UV95R	20UV96V 20UV96R	---	---
3/4"	20,000 PSI 1,380 bar	2.80	Vee Reg	20V125V 20V125R	20V126V 20V126R	---	---
1"	20,000 PSI 1,380 bar	5.20	Vee Reg	20V165V 20V165R	20V166V 20V166R	---	---

* Cv values listed are for 2-way straight pattern valves. For 2-way angle valves, increase Cv value by 50%.
+ Maximum pressure rating at 72°F (22°C) of the valve only. Working pressure is determined by the pressure rating of the pipe. ]]> Medium Pressure Equipment Medium Pressure Equipment Medium Pressure Equipment for Service to 20,000 PSI (1,380 bar)

Standard material of construction is 316 cold-worked stainless steel. Other materials are available on request. (Please consult Factory)

Tube OD	Elbow	Tee	Cross	Coupling	Replaceable Seat Coupling	Bulkhead Coupling
1/4"	20L4	20T4	20X4	20F4	20UF4	20BF4
3/8"	20L6	20T6	20X6	20F6	20UF6	20BF6
9/16"	20L9	20T9	20X9	20F9	20UF9	20BF9
3/4"	20L12	20T12	20X12	20F12	20UF12	20BF12
1"	20L16	20T16	20X16	20F16	20UF16	20BF16

All fittings are supplied complete with appropriate gland and ferrule.

	Check Valves		Filters
Tube OD	Ball Type	O-ring Type	Line	Cup
1/4"	20BC4	20SC4	20LF4	20SCF4
3/8"	20BC6	20SC6	20LF6	20SCF6
9/16"	20BC9	20SC9	20LF9	20SCF9
3/4"	20BC12	20SC12	20LF12	20SCF12
1"	20BC16	20SC16	20LF16	20SCF16

Standard o-ring material is Buna-N. Other materials available on request.
Line filters available in nominal ratings of 0.5, 2, 5, 10, 20, 40 and 100 micron.
Cup filters available in nominal ratings of 5, 10, 20, 40 and 100 micron.

Tube OD	Gland	Collar	Plug	Anit-Vibration Collet Gland	Cap	Safety Heads
1/4"	20G4	20C4	20P4	20AVCG4	20CA4	20SH4
3/8"	20G6	20C6	20P6	20AVCG6	20CA6	20SH6
9/16"	20G9	20C9	20P9	20AVCG9	20CA9	20SH9
3/4"	20G12	20C12	20P12	20AVCG12	20CA12	20SH12
1"	20G16	20C16	20P16	20AVCG16	20CA16	20SH16

Tubing is available in standard 20 to 24 foot length (6 to 7 meters); however, longer lengths are available on request.

Tube OD	I.D.	Catalog Number
1/4"	0.109" (2.8mm)	20-109-*
3/8"	0.203" (5.2mm)	20-203-*
9/16"	0.312" (7.9mm)	20-312-*
3/4"	0.438" (11.1mm)	20-438-*
1"	0.562" (14.3mm)	20-562-*

Nipples are stocked pre-cut coned and threaded in lengths up to 12” (305mm). Nipples also can be purchased in any custom length.

	Length
Tube OD	2.75"	3.00"	4.00"	6.00"	8.00"	10.00"	12.00"
1/4"	20N442-*	20N443-*	20N444-*	20N446-*	20N448-*	20N4410-*	20N4412-*
3/8"		20N663-*	20N664-*	20N666-*	20N668-*	20N6610-*	20N6612-*
9/16"			20N994-*	20N996-*	20N998-*	20N9910-*	20N9912-*
3/4"				20N126-*	20N128-*	20N1210-*	20N1212-*
1"				20N166-*	20N1268-*	20N1610-*	20N1612-*

* Complete catalog number by adding suffix 316 for 316 stainless steel, or suffix 304 for 304 stainless steel.

]]> High Pressure Equipment Coned and Threaded Needle Valves (30K-40K PSI) Needle Valves for Service from 30,000 PSI (2,070 bar) to 40,000 PSI (2,760 bar)

Tube OD	MAWP+	Cv*	Stem Style	2-way Straight	2-way Angle	3-way Two on Pressure	3-way One on Pressure
1/4"	30,000 PSI 2,070 bar	0.12	Vee Reg	30UV41V 30UV41R	30UV42V 30UV42R	30UV43V 30UV43R	30UV44V 30UV44R
3/8"	30,000 PSI 2,070 bar	0.23	Vee Reg	30UV61V 30UV61R	30UV62V 30UV62R	30UV63V 30UV63R	30UV64V 30UV64R
9/16"	30,000 PSI 2,070 bar	0.33	Vee Reg	30UV91V 30UV91R	30UV92V 30UV92R	30UV93V 30UV93R	30UV94V 30UV94R
1"	30,000 PSI 2,070 bar	2.80	Vee Reg	30V161V 30V161R	30V162V 30V162R	30V163V 30V163R	30V164V 30V164R
9/16"	40,000 PSI 2,760 bar	0.31	Vee Reg	40UV91V 40UV91R	40UV92V 40UV92R	40UV93V 40UV93R	40UV94V 40UV94R

Tube OD	MAWP+	Cv*	Stem Style	2-stem Manifold	2-way Angle Replaceable Seat	Metering	Micro-Metering
1/4"	30,000 PSI 2,070 bar	0.12	Vee Reg	30UV45V 30UV45R	30UV46V 30UV46R	30MV46V	30MMV44V
3/8"	30,000 PSI 2,070 bar	0.23	Vee Reg	30UV65V 30UV65R	30UV66V 30UV66R	30MV66V	30MMV64V
9/16"	30,000 PSI 2,070 bar	0.33	Vee Reg	30UV95V 30UV95R	30UV96V 30UV96R	-----	-----
1"	30,000 PSI 2,070 bar	2.80	Vee Reg	30V165V 30V165R	30V166V 30V166R	-----	-----
9/16"	40,000 PSI 2,760 bar	0.31	Vee Reg	40UV95V 40UV95R	40UV96V 40UV96R	-----	-----

* Cv values listed are for 2-way straight pattern valves. For 2-way angle valves, increase Cv value by 50%.
+ Maximum pressure rating at 72°F (22°C) of the valve only. Working pressure is determined by the pressure rating of the pipe.

Tube OD	MAWP+	Cv*	Stem Style	2-way Straight	2-way Angle	3-way Two on Pressure	3-way One on Pressure
1/4"	60,000 PSI 4,140 bar	0.08	Vee Reg	60UV41V 60UV41R	60UV42V 60UV42R	60UV43V 60UV43R	60UV44V 60UV44R
3/8"	60,000 PSI 4,140 bar	0.09	Vee Reg	60UV61V 60UV61R	60UV62V 60UV62R	60UV63V 60UV63R	60UV64V 60UV64R
9/16"	60,000 PSI 4,140 bar	0.14	Vee Reg	60UV91V 60UV91R	60UV92V 60UV92R	60UV93V 60UV93R	60UV94V 60UV94R
3/4"	60,000 PSI 4,140 bar	2.80	Vee Reg	60V121V 60V121R	60V122V 60V122R	60V123V 60V123R	60V124V 60V124R

Tube OD	MAWP+	Cv*	Stem Style	2-stem Manifold	2-way Angle Replaceable Seat	Metering	Micro-Metering
1/4"	60,000 PSI 4,140 bar	0.08	Vee Reg	60UV45V 60UV45R	60UV46V 60UV46R	60MV46V	60MMV46V
3/8"	60,000 PSI 4,140 bar	0.09	Vee Reg	60UV65V 60UV65R	60UV66V 60UV66R	60MV66V	60MMV66V
9/16"	60,000 PSI 4,140 bar	0.14	Vee Reg	60UV95V 60UV95R	60UV96V 60UV96R	-----	-----
3/4"	60,000 PSI 4,140 bar	2.80	Vee Reg	60V125V 60V125R	60V126V 60V126R	-----	-----

* Cv values listed are for 2-way straight pattern valves. For 2-way angle valves, increase Cv value by 50%.
+ Maximum pressure rating at 72°F (22°C) of the valve only. Working pressure is determined by the pressure rating of the pipe.

Standard material of construction is 316 cold-worked stainless steel. Other materials are available on request. (Please consult factory)

Tube OD	MAWP+	Elbow	Tee	Cross	Coupling	Replaceable Seat Coupling	Bulkhead Coupling
1"	30,000 PSI 2,070 bar	30L16	30T16	30X16	30F16	30UF16	30BF16
9/16"	40,000 PSI 2,760 bar	40L9	40T9	40X9	40F9	40UF9	40BF9
1/4"	60,000 PSI 4,140 bar	60L4	60T4	60X4	60F4	60UF4	60BF4
3/8"	60,000 PSI 4,140 bar	60L6	60T6	60X6	60F6	60UF6	60BF6
9/16"	60,000 PSI 4,140 bar	60L9	60T9	60X9	60F9	60UF9	60BF9
3/4"	60,000 PSI 4,140 bar	60L12	60T12	60X12	60F12	60UF12	60BF12

All fittings are supplied complete with appropriate gland and ferrule.

		Check Valves		Filters
Tube OD	MAWP+	Ball Type	O-ring Type	Line	Cup
1"	30,000 PSI 2,070 bar	30BC16	30BSC16	30LF16	30SCF16
9/16"	40,000 PSI 2,760 bar	40BC9	40SC9	40LF9	40SCF9
1/4"	60,000 PSI 4,140 bar	60BC4	60SC4	60LF4	60SCF4
3/8"	60,000 PSI 4,140 bar	60BC6	60SC6	60LF6	60SCF6
9/16"	60,000 PSI 4,140 bar	60BC9	60SC9	60LF9	60SCF9
3/4"	60,000 PSI 4,140 bar	60BC12	60SC12	60LF12	60SCF12

Standard o-ring material is Buna-N. Other materials available on request.
Line filters available in nominal ratings of 0.5, 2, 5, 10, 20, 40 and 100 micron.
Cup filters available in nominal ratings of 5, 10, 20, 40 and 100 micron.

Tube OD	MAWP+	Gland	Collar	Plug	Anti-Vibration Collet Gland	Cap	Safety Heads
1"	30,000 PSI 2,070 bar	20G16	20C16	30P16	20AVCG16	30CA16	30SH16
9/16"	40,000 PSI 2,760 bar	60G9	60C9	40P9	60AVG9	40CA9	40SH9
1/4"	60,000 PSI 4,140 bar	60G4	60C4	60P4	60AVG4	60CA4	60SH4
3/8"	60,000 PSI 4,140 bar	60G6	60C6	60P6	60AVG6	60CA6	60SH6
9/16"	60,000 PSI 4,140 bar	60G9	60C9	60P9	60AVG9	60CA9	60SH9
3/4"	60,000 PSI 4,140 bar	60G12	60C12	60P12	60AVG12	60CA12	60SH12

Tubing is available in standard 20 to 24 foot length (6 to 7 meters); however, longer lengths are available on request.

Tube OD	I.D.	Catalog Number
1"	0.438" (11.1mm)	30-438-*
9/16"	0.250" (6.4mm)	40-250-*
1/4"	0.083" (2.1mm)	60-083-*
3/8"	0.125" (3.2mm)	60-125-*
9/16"	0.188" (4.8mm)	60-188-*
3/4"	0.250" (6.4mm)	60-250-*

Nipples are stocked pre-cut coned and threaded in lengths up to 12” (305mm). Nipples also can be purchased in any custom length.

	Length
Tube OD	2.75"	3.00"	4.00"	6.00"	8.00"	10.00"	12.00"
1"				30N166-*	30N168-*	30N1610-*	30N1612-*
9/16"			40N994-*	40N996-*	40N998-*	40N9910-*	40N9912-*
1/4"	60N442-*	60N443-*	60N444-*	60N446-*	60N448-*	60N4410-*	60N4412-*
3/8"		60N663-*	60N664-*	60N666-*	60N668-*	60N6610-*	60N6612-*
9/16"			60N994-*	60N996-*	60N998-*	60N9910-*	60N9912-*
3/4"				60N126-*	60N128-*	60N1210-*	60N1212-*

* Complete catalog number by adding suffix 316 for 316 stainless steel, or suffix 304 for 304 stainless steel.

]]> High Pressure Equipment Coned and Threaded High Pressure Equipment (150K PSI) 150V Series Needle Valves and Equipment for Service to 150,000 PSI (10,340 bar)

Tube OD	MAWP+	Cv*	Stem Style	2-way Straight	2-way Angle	3-way Two on Pressure
5/16"	150,000 PSI 10,340 bar	0.27	Vee Reg	150V51V 150V51R	150V52V 150V52R	150V53V 150V53R

* Cv values listed are for 2-way straight pattern valves. For 2-way angle valves, increase Cv value by 50%.
+ Maximum pressure rating at 72°F (22°C) of the valve only. Working pressure is determined by the pressure rating of the pipe.

Tube OD	MAWP+	Elbow	Tee	Cross	Coupling	Replaceable Seat Coupling	Bulkhead Coupling
5/16"	150,000 PSI 10,340 bar	150L5	150T5	150X5	150F5	150UF5	150BF5

Tube OD	MAWP+	Gland	Collar	Plug	Cap
5/16"	150,000 PSI 10,340 bar	150G5	150C5	150P5	150CA5

Tubing is available in standard 20 to 24 foot length (6 to 7 meters); however, longer lengths are available on request.

Tube OD	I.D.	Catalog Number
5/16"	0.063" (1.6mm)	150-063-316

Nipples are stocked pre-cut coned and threaded in lengths up to 12" (305mm). Nipples also can be purchased in any custom length.

	Length
Tube OD	4.00"	6.00"	8.00"	10.00"	12.00"
5/16"	150N554-*	150N556-*	150N558-*	150N5510-*	150N5512-*

* Complete catalog number by adding suffix 316 for 316 stainless steel, or suffix 304 for 304 stainless steel.

]]> Medium Pressure Equipment Needle Valve Options Needle Valves for Service from 30,000 PSI (2,070 bar) to 40,000 PSI (2,760 bar)

Standard Features

• Non-rotating stem prevents galling and scoring
• Four stem styles: Vee, Regulating, Metering, and Micro-Metering
• 17-4PH stem for longer service life. 316 wetted parts are also available by specifying option -316WP
• Glass-filled Teflon packing for temperatures to 600°F (315°C)
• Integral through holes for bracket mounting. A panel-mounting option is also available
• Positive gland locking device
• Wide range of options allow customizing of valve

Standard Materials of Construction

Standard materials of construction include 316 cold-worked stainless steel, 17-4PH, and glass-filled Teflon. All BuTech equipment may also be produced in any machinable alloy. Some of the more common exotic materials used are:

• Hastelloy™
• Inconel™
• Titanium
• Monel 400™

Packing and Stem Materials
Specify:	Option:
-GR	Grafoil packings for service to 800°F (426°C)
-TFE	Virgin Teflon packing
-316WP	316 wetted parts
-STS	Stellite tipped stem
-SRS	Stellite replaceable seat (Replaceable seat valves only)

Handle Options
Specify:	Option:
-PH	Round plastic handle in place of aluminum (available on 1/4” through 9/16" sizes)
-SS	Stainless steel handle in place of aluminum (available on 1/4” through 9/16" sizes; SS on 1" is standard)
-EXT_	Handle extended above valve body; specify number of inches of extra height desired (example: EXT6 is a 6" extension)

Security Options
Specify:	Option:
-HLD	Handle locking device (prevents unauthorized opening/closing of valve)
-SLD	Stem locking device (prevents stem from turning due to vibration)

Extreme Service
Specify:	Option:
-AVG	Anti-vibration glands instead of standard glands for applications with excessive vibration or shock
-O2	Cleaned for oxygen service
-HT	Extended stuffing box, graphite packing, and materials for high-temperature service to 1,200°F (648°C)
-HTF	Finned extended stuffing box, graphite packing, and materials for high-temperature service to 1,200°F (648°C)
-LT	Extended stuffing box, Teflon packing, and materials for cryogenic service to -423°F (-251°C)
-LTF	Finned extended stuffing box, Teflon packing, and materials for cryogenic service to -423°F (-251°C)

Panel Mount
Specify:	Option:
-PM	Panel-mount packing gland for single-hole mounting

]]> BuTech Adapters and Accessories Air and Hydraulic Actuators BuTech Air and Hydraulic Actuators

BuTech Pressure Systems air and hydraulic actuators are designed for remote control of tough-to-handle fluid and gas systems, such as corrosive processes, high temperature test loops, cryogenic systems, sampling of steam generators, and hazardous environments. Since BuTech air and hydraulic operators are virtually maintenance-free, they are ideally suited for service in limited access areas. The compact size and weight of these units permit installation where space or weight is at a premium.

The single-acting actuators have a fail-safe feature: The Air-to-Open actuator closes the valve on loss of operating pressure, while the Air-to-Close actuator opens the valve on loss of operating pressure. These very desirable safety features are necessary in critical systems.

BuTech offers both 5" and 8" air actuators for the valves covered on this website. Also available are the compact hydraulic actuators. See the chart below for proper selection.

		NPT Pipe
		1/8"	1/4"	3/8"	1/2"	3/4"	1"
NPT Pipe
	1/8"	MA2P2P	MA2P4P	MA2P6P	MA2P8P	MA2P12P	MA2P16P
	1/4"	MA2P4P	MA4P4P	MA4P6P	MA4P8P	MA4P12P	MA4P16P
	3/8"	MA2P6P	MA4P6P	MA6P6P	MA6P8P	MA6P12P	MA6P16P
	1/2"	MA2P8P	MA4P8P	MA6P8P	MA8P8P	MA8P12P	MA8P16P
	3/4"	MA2P12P	MA4P12P	MA6P12P	MA8P12P	MA12P12P	MA12P16P
	1"	MA2P16P	MA4P16P	MA6P16P	MA8P16P	MA12P16P	MA16P16P
Single-Ferrule Compression
	1/8"	MA2L2P	MA2L4P	MA2L6P	MA2L8P	MA2L12P	MA2L16P
	1/4"	MA4L2P	MA4L4P	MA4L6P	MA4L8P	MA4L12P	MA4L16P
	3/8"	MA6L2P	MA6L4P	MA6L6P	MA6L8P	MA6L12P	MA6L16P
	1/2"	MA8L2P	MA8L4P	MA8L6P	MA8L8P	MA8L12P	MA8L16P
Medium Pressure Cone-&-Thread
	1/4"	MA4M2P	MA4M4P	MA4M6P	MA4M8P	MA4M12P	MA4M16P
	3/8"	MA6M2P	MA6M4P	MA6M6P	MA6M8P	MA6M12P	MA6M16P
	9/16"	MA9M2P	MA9M4P	MA9M6P	MA9M8P	MA9M12P	MA9M16P
	3/4"	MA12M2P	MA12M4P	MA12M6P	MA12M8P	MA12M12P	MA12M16P
	1"	MA16M2P	MA16M4P	MA16M6P	MA16M8P	MA16M12P	MA16M16P
High Pressure Cone-&-Thread
	1/4"	MA4H2P	MA4H4P	MA4H6P	MA4H8P	MA4H12P	MA4H16P
	3/8"	MA6H2P	MA6H4P	MA6H6P	MA6H8P	MA6H12P	MA6H16P
	9/16"	MA9H2P	MA9H4P	MA9H6P	MA9H8P	MA9H12P	MA9H16P
	3/4"	MA12H2P	MA12H4P	MA12H6P	MA12H8P	MA12H12P	MA12H16P
	1"	MA16H2P	MA16H4P	MA16H6P	MA16H8P	MA16H12P	MA16H16P

		Single-Ferrule Compression Tube
		1/8"	1/4"	3/8"	1/2"
NPT Pipe
	1/8"	MA2L2P	MA4L2P	MA6L2P	MA8L2P
	1/4"	MA2L4P	MA4L4P	MA6L4P	MA8L4P
	3/8"	MA2L6P	MA4L6P	MA6L6P	MA8L6P
	1/2"	MA2L8P	MA4L8P	MA6L8P	MA8L8P
	3/4"	MA2L12P	MA4L12P	MA6L12P	MA8L12P
	1"	MA2L16P	MA4L16P	MA6L16P	MA8L16P
Single-Ferrule Compression
	1/8"	---	MA2L4L	MA2L6L	MA2L8L
	1/4"	MA2L4L	---	MA4L6L	MA4L8L
	3/8"	MA2L6L	MA4L6L	---	MA6L8L
	1/2"	MA2L8L	MA4L8L	MA6L8L	---
Medium Pressure Cone-&-Thread
	1/4"	MA2L4M	MA4L4M	MA6L4M	MA8L4M
	3/8"	MA2L6M	MA4L6M	MA6L6M	MA8L6M
	9/16"	MA2L9M	MA4L9M	MA6L9M	MA8L9M
	3/4"	MA2L12M	MA4L12M	MA6L12M	MA8L12M
	1"	MA2L16M	MA4L16M	MA6L16M	MA8L16M
High Pressure Cone-&-Thread
	1/4"	MA2L4H	MA4L4H	MA6L4H	MA8L4H
	3/8"	MA2L6H	MA4L6H	MA6L6H	MA8L6H
	9/16"	MA2L9H	MA4L9H	MA6L9H	MA8L9H
	3/4"	MA2L12H	MA4L12H	MA6L12H	MA8L12H
	1"	MA2L16H	MA4L16H	MA6L16H	MA8L16H

		Medium Pressure Cone-&-Thread
		1/4"	3/8"	9/16"	3/4"	1"
NPT Pipe
	1/8"	MA4M2P	MA6M2P	MA9M2P	MA12M2P	MA16M2P
	1/4"	MA4M4P	MA6M4P	MA9M4P	MA12M4P	MA16M4P
	3/8"	MA4M6P	MA6M6P	MA9M6P	MA12M6P	MA16M6P
	1/2"	MA4M8P	MA6M8P	MA9M8P	MA12M8P	MA16M8P
	3/4"	MA4M12P	MA6M12P	MA9M12P	MA12M12P	MA16M12P
	1"	MA4M16P	MA6M16P	MA9M16P	MA12M16P	MA16M16P
Single-Ferrule Compression
	1/8"	MA2L4M	MA2L6M	MA2L9M	MA2L12M	MA2L16M
	1/4"	MA4L4M	MA4L6M	MA4L9M	MA4L12M	MA4L16M
	3/8"	MA6L4M	MA6L6M	MA6L9M	MA6L12M	MA6L16M
	1/2"	MA8L4M	MA8L6M	MA8L9M	MA8L12M	MA8L16M
Medium Pressure Cone-&-Thread
	1/4"	MA4M4M	MA4M6M	MA4M9M	MA4M12M	MA4M16M
	3/8"	MA4M6M	MA6M6M	MA6M9M	MA6M12M	MA6M16M
	9/16"	MA4M9M	MA6M9M	MA9M9M	MA9M12M	MA9M16M
	3/4"	MA4M12M	MA6M12M	MA9M12M	MA12M12M	MA12M16M
	1"	MA4M16M	MA6M16M	MA9M16M	MA12M16M	MA16M16M
High Pressure Cone-&-Thread
	1/4"	MA4M4H	MA6M4H	MA9M4H	MA12M4H	MA16M4H
	3/8"	MA4M6H	MA6M6H	MA9M6H	MA12M6H	MA16M6H
	9/16"	MA4M9H	MA6M9H	MA9M9H	MA12M9H	MA16M9H
	3/4"	MA4M12H	MA6M12H	MA9M12H	MA12M12H	MA16M12H
	1"	MA4M16H	MA6M16H	MA9M16H	MA12M16H	MA16M16H

		High Pressure Cone-&-Thread
		1/4"	3/8"	9/16"	3/4"	1"
NPT Pipe
	1/8"	MA4H2P	MA6H2P	MA9H2P	MA12H2P	MA16H2P
	1/4"	MA4H4P	MA6H4P	MA9H4P	MA12H4P	MA16H4P
	3/8"	MA4H6P	MA6H6P	MA9H6P	MA12H6P	MA16H6P
	1/2"	MA4H8P	MA6H8P	MA9H8P	MA12H8P	MA16H8P
	3/4"	MA4H12P	MA6H12P	MA9H12P	MA12H12P	MA16H12P
	1"	MA4H16P	MA6H16P	MA9H16P	MA12H16P	MA16H16P
Single-Ferrule Compression
	1/8"	MA2L4H	MA2L6H	MA2L9H	MA2L12H	MA2L16H
	1/4"	MA4L4H	MA4L6H	MA4L9H	MA4L12H	MA4L16H
	3/8"	MA6L4H	MA6L6H	MA6L9H	MA6L12H	MA6L16H
	1/2"	MA8L4H	MA8L6H	MA8L9H	MA8L12H	MA8L16H
Medium Pressure Cone-&-Thread
	1/4"	MA4M4H	MA4M6H	MA4M9H	MA4M12H	MA4M16H
	3/8"	MA6M4H	MA6M6H	MA6M9H	MA6M12H	MA6M16H
	9/16"	MA9M4H	MA9M6H	MA9M9H	MA9M12H	MA9M16H
	3/4"	MA12M4H	MA12M6H	MA12M9H	MA12M12H	MA12M16H
	1"	MA16M4H	MA16M6H	MA16M9H	MA16M12H	MA16M16H
High Pressure Cone-&-Thread
	1/4"	MA4H4H	MA4H6H	MA4H9H	MA4H12H	MA4H16H
	3/8"	MA4H6H	MA6H6H	MA6H9H	MA6H12H	MA6H16H
	9/16"	MA4H9H	MA6H9H	MA9H9H	MA9H12H	MA9H16H
	3/4"	MA4H12H	MA6H12H	MA9H12H	MA12H12H	MA12H16H
	1"	MA4H16H	MA6H16H	MA9H16H	MA12H16H	MA16H16H

Note: The Maximum Allowable Working Pressure of an adapter or coupling shall not exceed the MAWP of the selected connection.

]]> BuTech Adapters and Accessories Male-Female Adapters Male-Female Adapters

BuTech Pressure Systems stocks a wide range of male-female adapters. The charts below show the most common combinations. Other connections and sizes are available. Standard material of construction is 316 cold-worked stainless steel. Other materials are available on request. (Please consult Factory)

			Female End
			NPT Pipe
			1/8"	1/4"	3/8"	1/2"	3/4"	1"
Male End
	NPT Pipe
		1/8"	10A2P2P	10A2P4P	10A2P6P	10A2P8P	10A2P12P	10A2P16P
		1/4"	10A4P2P	10A4P4P	10A4P6P	10A4P8P	10A4P12P	10A4P16P
		3/8"	10A6P2P	10A6P4P	10A6P6P	10A6P8P	10A6P12P	10A6P16P
		1/2"	10A8P2P	10A8P4P	10A8P6P	10A8P8P	10A8P12P	10A8P16P
		3/4"	10A12P2P	10A12P4P	10A12P6P	10A12P8P	10A12P12P	10A12P16P
		1"	10A16P2P	10A16P4P	10A16P6P	10A16P8P	10A16P12P	10A16P16P
	Single-Ferrule Compression
		1/8"	LPA2L2P	LPA2L4P	LPA2L6P	LPA2L8P	LPA2L12P	LPA2L16P
		1/4"	LPA4L2P	LPA4L4P	LPA4L6P	LPA4L8P	LPA4L12P	LPA4L16P
		3/8"	LPA6L2P	LPA6L4P	LPA6L6P	LPA6L8P	LPA6L12P	LPA6L16P
		1/2"	LPA8L2P	LPA8L4P	LPA8L6P	LPA8L8P	LPA8L12P	LPA8L16P
	Medium Pressure Cone-&-Thread
		1/4"	10A4M2P	10A4M4P	10A4M6P	10A4M8P	10A4M12P	10A4M16P
		3/8"	10A6M2P	10A6M4P	10A6M6P	10A6M8P	10A6M12P	10A6M16P
		9/16"	10A9M2P	10A9M4P	10A9M6P	10A9M8P	10A9M12P	10A9M16P
		3/4"	10A12M2P	10A12M4P	10A12M6P	10A12M8P	10A12M12P	10A12M16P
		1"	10A16M2P	10A16M4P	10A16M6P	10A16M8P	10A16M12P	10A16M16P
	High Pressure Cone-&-Thread
		1/4"	10A4H2P	10A4H4P	10A4H6P	10A4H8P	10A4H12P	10A4H16P
		3/8"	10A6H2P	10A6H4P	10A6H6P	10A6H8P	10A6H12P	10A6H16P
		9/16"	10A9H2P	10A9H4P	10A9H6P	10A9H8P	10A9H12P	10A9H16P
		3/4"	10A12H2P	10A12H4P	10A12H6P	10A12H8P	10A12H12P	10A12H16P
		1"	10A16H2P	10A16H4P	10A16H6P	10A16H8P	10A16H12P	10A16H16P

			Female End
			Single-Ferrule Compression Tube
			1/8"	1/4"	3/8"	1/2"
Male End
	NPT Pipe
		1/8"	LPA2P2L	LPA2P4L	LPA2P6L	LPA2P8L
		1/4"	LPA4P2L	LPA4P4L	LPA4P6L	LPA4P8L
		3/8"	LPA6P2L	LPA6P4L	LPA6P6L	LPA6P8L
		1/2"	LPA8P2L	LPA8P4L	LPA8P6L	LPA8P8L
		3/4"	LPA12P2L	LPA12P4L	LPA12P6L	LPA12P8L
		1"	LPA16P2L	LPA16P4L	LPA16P6L	LPA16P8L
	Single-Ferrule Compression
		1/8"	LPA2L2L	LPA2L4L	LPA2L6L	LPA2L8L
		1/4"	LPA4L2L	LPA4L4L	LPA4L6L	LPA4L8L
		3/8"	LPA6L2L	LPA6L4L	LPA6L6L	LPA6L8L
		1/2"	LPA8L2L	LPA8L4L	LPA8L6L	LPA8L8L
	Medium Pressure Cone-&-Thread
		1/4"	LPA4M2L	LPA4M4L	LPA4M6L	LPA4M8L
		3/8"	LPA6M2L	LPA6M4L	LPA6M6L	LPA6M8L
		9/16"	LPA9M2L	LPA9M4L	LPA9M6L	LPA9M8L
		3/4"	LPA12M2L	LPA12M4L	LPA12M6L	LPA12M8L
		1"	LPA16M2L	LPA16M4L	LPA16M6L	LPA16M8L
	High Pressure Cone-&-Thread
		1/4"	LPA4H2L	LPA4H4L	LPA4H6L	LPA4H8L
		3/8"	LPA6H2L	LPA6H4L	LPA6H6L	LPA6H8L
		9/16"	LPA9H2L	LPA9H4L	LPA9H6L	LPA9H8L
		3/4"	LPA12H2L	LPA12H4L	LPA12H6L	LPA12H8L
		1"	LPA16H2L	LPA16H4L	LPA16H6L	LPA16H8L

			Female End
			Medium Pressure Cone-&-Thread
			1/4"	3/8"	9/16"	3/4"	1"
Male End
	NPT Pipe
		1/8"	10A2P4M	10A2P6M	10A2P9M	10A2P12M	10A2P16M
		1/4"	10A4P4M	10A4P6M	10A4P9M	10A4P12M	10A4P16M
		3/8"	10A6P4M	10A6P6M	10A6P9M	10A6P12M	10A6P16M
		1/2"	10A8P4M	10A8P6M	10A8P9M	10A8P12M	10A8P16M
		3/4"	10A12P4M	10A12P6M	10A12P9M	10A12P12M	10A12P16M
		1"	10A16P4M	10A16P6M	10A16P9M	10A16P12M	10A16P16M
	Single-Ferrule Compression
		1/8"	LPA2L4M	LPA2L6M	LPA2L9M	LPA2L12M	LPA2L16M
		1/4"	LPA4L4M	LPA4L6M	LPA4L9M	LPA4L12M	LPA4L16M
		3/8"	LPA6L4M	LPA6L6M	LPA6L9M	LPA6L12M	LPA6L16M
		1/2"	LPA8L4M	LPA8L6M	LPA8L9M	LPA8L12M	LPA8L16M
	Medium Pressure Cone-&-Thread
		1/4"	20A4M4M	20A4M6M	20A4M9M	20A4M12M	20A4M16M
		3/8"	20A6M4M	20A6M6M	20A6M9M	20A6M12M	20A6M16M
		9/16"	20A9M4M	20A9M6M	20A9M9M	20A9M12M	20A9M16M
		3/4"	20A12M4M	20A12M6M	20A12M9M	20A12M12M	20A12M16M
		1"	20A16M4M	20A16M6M	20A16M9M	20A16M12M	20A16M16M
	High Pressure Cone-&-Thread
		1/4"	20A4H4M	20A4H6M	20A4H9M	20A4H12M	20A4H16M
		3/8"	20A6H4M	20A6H6M	20A6H9M	20A6H12M	20A6H16M
		9/16"	20A9H4M	20A9H6M	20A9H9M	20A9H12M	20A9H16M
		3/4"	20A12H4M	20A12H6M	20A12H9M	20A12H12M	20A12H16M
		1"	20A16H4M	20A16H6M	20A16H9M	20A16H12M	20A16H16M

			Female End
			High Pressure Cone-&-Thread
			1/4"	3/8"	9/16"	3/4"	1"
Male End
	NPT Pipe
		1/8"	10A2P4H	10A2P6H	10A2P9H	10A2P12H	10A2P16H
		1/4"	10A4P4H	10A4P6H	10A4P9H	10A4P12H	10A4P16H
		3/8"	10A6P4H	10A6P6H	10A6P9H	10A6P12H	10A6P16H
		1/2"	10A8P4H	10A8P6H	10A8P9H	10A8P12H	10A8P16H
		3/4"	10A12P4H	10A12P6H	10A12P9H	10A12P12H	10A12P16H
		1"	10A16P4H	10A16P6H	10A16P9H	10A16P12H	10A16P16H
	Single-Ferrule Compression
		1/8"	LPA2L4H	LPA2L6H	LPA2L9H	LPA2L12H	LPA2L6H
		1/4"	LPA4L4H	LPA4L6H	LPA4L9H	LPA4L12H	LPA4L6H
		3/8"	LPA6L4H	LPA6L6H	LPA6L9H	LPA6L12H	LPA6L6H
		1/2"	LPA8L4H	LPA8L6H	LPA8L9H	LPA8L12H	LPA8L6H
	Medium Pressure Cone-&-Thread
		1/4"	20A4M4H	20A4M6H	20A4M9H	20A4M12H	20A4M16H
		3/8"	20A6M4H	20A6M6H	20A6M9H	20A6M12H	20A6M16H
		9/16"	20A9M4H	20A9M6H	20A9M9H	20A9M12H	20A9M16H
		3/4"	20A12M4H	20A12M6H	20A12M9H	20A12M12H	20A12M16H
		1"	20A16M4H	20A16M6H	20A16M9H	20A16M12H	20A16M16H
	High Pressure Cone-&-Thread
		1/4"	60A4H4H	60A4H6H	60A4H9H	60A4H12H	30A4H16H
		3/8"	60A6H4H	60A6H6H	60A6H9H	60A6H12H	30A6H16H
		9/16"	60A9H4H	60A9H6H	60A9H9H	60A9H12H	30A9H16H
		3/4"	60A12H4H	60A12H6H	60A12H9H	60A12H12H	30A12H16H
		1"	30A16H4H	30A16H6H	30A16H9H	30A16H12H	30A16H16H

Note: The Maximum Allowable Working Pressure of an adapter or coupling shall not exceed the MAWP of the selected connection.

]]> BuTech Adapters and Accessories Female-Female Couplings Female-Female Couplings

BuTech Pressure Systems stocks a wide range of female-female adapters. The charts below show the most common combinations. Other connections and sizes are available. Standard material of construction is 316 cold-worked stainless steel. Other materials are available on request. (Please consult Factory)

		NPT Pipe
		1/8"	1/4"	3/8"	1/2"	3/4"	1"
NPT Pipe
	1/8"	FPF2	10F2P4P	10F2P6P	10F2P8P	10F2P12P	10F2P16P
	1/4"	10F2P4P	FPF4	10F4P6P	10F4P8P	10F4P12P	10F4P16P
	3/8"	10F2P6P	10F4P6P	FPF6	10F6P8P	10F6P12P	10F6P16P
	1/2"	10F2P8P	10F4P8P	10F6P8P	FPF8	10F8P12P	10F8P16P
	3/4"	10F2P12P	10F4P12P	10F6P12P	10F8P12P	FPF12	10F12P16P
	1"	10F2P16P	10F4P16P	10F6P16P	10F8P16P	10F12P16P	FPF16
Single-Ferrule Compression
	1/8"	LPC2L2P	LPC2L4P	LPC2L6P	LPC2L8P	LPC2L12P	LPC2L16P
	1/4"	LPC4L2P	LPC4L4P	LPC4L6P	LPC4L8P	LPC4L12P	LPC4L16P
	3/8"	LPC6L2P	LPC6L4P	LPC6L6P	LPC6L8P	LPC6L12P	LPC6L16P
	1/2"	LPC8L2P	LPC8L4P	LPC8L6P	LPC8L8P	LPC8L12P	LPC8L16P
Medium Pressure Cone-&-Thread
	1/4"	10F4M2P	10F4M4P	10F4M6P	10F4M8P	10F4M12P	10F4M16P
	3/8"	10F6M2P	10F6M4P	10F6M6P	10F6M8P	10F6M12P	10F6M16P
	9/16"	10F9M2P	10F9M4P	10F9M6P	10F9M8P	10F9M12P	10F9M16P
	3/4"	10F12M2P	10F12M4P	10F12M6P	10F12M8P	10F12M12P	10F12M16P
	1"	10F16M2P	10F16M4P	10F16M6P	10F16M8P	10F16M12P	10F16M16P
High Pressure Cone-&-Thread
	1/4"	10F4H2P	10F4H4P	10F4H6P	10F4H8P	10F4H12P	10F4H16P
	3/8"	10F6H2P	10F6H4P	10F6H6P	10F6H8P	10F6H12P	10F6H16P
	9/16"	10F9H2P	10F9H4P	10F9H6P	10F9H8P	10F9H12P	10F9H16P
	3/4"	10F12H2P	10F12H4P	10F12H6P	10F12H8P	10F12H12P	10F12H16P
	1"	10F16H2P	10F16H4P	10F16H6P	10F16H8P	10F16H12P	10F16H16P

		Single-Ferrule Compression Tube
		1/8"	1/4"	3/8"	1/2"
NPT Pipe
	1/8"	LPC2L2P	LPC4L2P	LPC6L2P	LPC8L2P
	1/4"	LPC2L4P	LPC4L4P	LPC6L4P	LPC8L4P
	3/8"	LPC2L6P	LPC4L6P	LPC6L6P	LPC8L6P
	1/2"	LPC2L8P	LPC4L8P	LPC6L8P	LPC8L8P
	3/4"	LPC2L12P	LPC4L12P	LPC6L12P	LPC8L12P
	1"	LPC2L16P	LPC4L16P	LPC6L16P	LPC8L16P
Single-Ferrule Compression
	1/8"	LPC2	LPC2L4L	LPC2L6L	LPC2L8L
	1/4"	LPC2L4L	LPC4	LPC4L6L	LPC4L8L
	3/8"	LPC2L6L	LPC4L6L	LPC6	LPC6L8L
	1/2"	LPC2L8L	LPC4L8L	LPC6L8L	LPC8
Medium Pressure Cone-&-Thread
	1/4"	LPC2L4M	LPC4L4M	LPC6L4M	LPC8L4M
	3/8"	LPC2L6M	LPC4L6M	LPC6L6M	LPC8L6M
	9/16"	LPC2L9M	LPC4L9M	LPC6L9M	LPC8L9M
	3/4"	LPC2L12M	LPC4L12M	LPC6L12M	LPC8L12M
	1"	LPC2L16M	LPC4L16M	LPC6L16M	LPC8L16M
High Pressure Cone-&-Thread
	1/4"	LPC2L4H	LPC4L4H	LPC6L4H	LPC8L4H
	3/8"	LPC2L6H	LPC4L6H	LPC6L6H	LPC8L6H
	9/16"	LPC2L9H	LPC4L9H	LPC6L9H	LPC8L9H
	3/4"	LPC2L12H	LPC4L12H	LPC6L12H	LPC8L12H
	1"	LPC2L16H	LPC4L16H	LPC6L16H	LPC8L16H

		Medium Pressure Cone-&-Thread
		1/4"	3/8"	9/16"	3/4"	1"
NPT Pipe
	1/8"	10F4M2P	10F6M2P	10F9M2P	10F12M2P	10F16M2P
	1/4"	10F4M4P	10F6M4P	10F9M4P	10F12M4P	10F16M4P
	3/8"	10F4M6P	10F6M6P	10F9M6P	10F12M6P	10F16M6P
	1/2"	10F4M8P	10F6M8P	10F9M8P	10F12M8P	10F16M8P
	3/4"	10F4M12P	10F6M12P	10F9M12P	10F12M12P	10F16M12P
	1"	10F4M16P	10F6M16P	10F9M16P	10F12M16P	10F16M16P
Single-Ferrule Compression
	1/8"	LPC2L4M	LPC2L6M	LPC2L9M	LPC2L12M	LPC2L16M
	1/4"	LPC4L4M	LPC4L6M	LPC4L9M	LPC4L12M	LPC4L16M
	3/8"	LPC6L4M	LPC6L6M	LPC6L9M	LPC6L12M	LPC6L16M
	1/2"	LPC8L4M	LPC8L6M	LPC8L9M	LPC8L12M	LPC8L16M
Medium Pressure Cone-&-Thread
	1/4"	20F4	20F4M6M	20F4M9M	20F4M12M	20F4M16M
	3/8"	20F4M6M	20F6	20F6M9M	20F6M12M	20F6M16M
	9/16"	20F4M9M	20F6M9M	20F9	20F9M12M	20F9M16M
	3/4"	20F4M12M	20F6M12M	20F9M12M	20F12	20F12M16M
	1"	20F4M16M	20F6M16M	20F9M16M	20F12M16M	20F16
High Pressure Cone-&-Thread
	1/4"	20F4M4H	20F6M4H	20F9M4H	20F12M4H	20F16M4H
	3/8"	20F4M6H	20F6M6H	20F9M6H	20F12M6H	20F16M6H
	9/16"	20F4M9H	20F6M9H	20F9M9H	20F12M9H	20F16M9H
	3/4"	20F4M12H	20F6M12H	20F9M12H	20F12M12H	20F16M12H
	1"	20F4M16H	20F6M16H	20F9M16H	20F12M16H	20F16M16H

		High Pressure Cone-&-Thread
		1/4"	3/8"	9/16"	3/4"	1"
NPT Pipe
	1/8"	10F4H2P	10F6H2P	10F9H2P	10F12H2P	10F16H2P
	1/4"	10F4H4P	10F6H4P	10F9H4P	10F12H4P	10F16H4P
	3/8"	10F4H6P	10F6H6P	10F9H6P	10F12H6P	10F16H6P
	1/2"	10F4H8P	10F6H8P	10F9H8P	10F12H8P	10F16H8P
	3/4"	10F4H12P	10F6H12P	10F9H12P	10F12H12P	10F16H12P
	1"	10F4H16P	10F6H16P	10F9H16P	10F12H16P	10F16H16P
Single-Ferrule Compression
	1/8"	LPC2L4H	LPC2L6H	LPC2L9H	LPC2L12H	LPC2L16H
	1/4"	LPC4L4H	LPC4L6H	LPC4L9H	LPC4L12H	LPC4L16H
	3/8"	LPC6L4H	LPC6L6H	LPC6L9H	LPC6L12H	LPC6L16H
	1/2"	LPC8L4H	LPC8L6H	LPC8L9H	LPC8L12H	LPC8L16H
Medium Pressure Cone-&-Thread
	1/4"	20F4M4H	20F4M6H	20F4M9H	20F4M12H	20F4M16H
	3/8"	20F6M4H	20F6M6H	20F6M9H	20F6M12H	20F6M16H
	9/16"	20F9M4H	20F9M6H	20F9M9H	20F9M12H	20F9M16H
	3/4"	20F12M4H	20F12M6H	20F12M9H	20F12M12H	20F12M16H
	1"	20F16M4H	20F16M6H	20F16M9H	20F16M12H	20F16M16H
High Pressure Cone-&-Thread
	1/4"	60F4	60F4H6H	60F4H9H	60F4H12H	30F4H16H
	3/8"	60F4H6H	60F6	60F6H9H	60F6H12H	30F6H16H
	9/16"	60F4H9H	60F6H9H	60F9	60F9H12H	30F9H16H
	3/4"	60F4H12H	60F6H12H	60F9H12H	60F12	30F12H16H
	1"	30F4H16H	30F6H16H	30F9H16H	30F12H16H	30F16

Note: The Maximum Allowable Working Pressure of an adapter or coupling shall not exceed the MAWP of the selected connection.

]]> BuTech Adapters and Accessories Quick Disconnect Couplings Quick Disconnect Couplings

• Pressures to 60,000 PSI (4,140 bar)
• Multiple port and seal options available
• Unique, self-locking design - will not disconnect under pressure
• Low pressure drop valve design or full-flow non-valved version available
• Stainless steel construction for long, trouble-free service

]]> BuTech Adapters and Accessories High Pressure Hose High Pressure Hose

BuTech offers a variety of high pressure hose for water jet cutting, high pressure testing, and hydraulics. All hose assemblies are available with a choice of female or male end connections in 1/8”, 1/4”, 3/8”, 1/2", 9/16”, 3/4", and 1” sizes. Operating temperature range is from -40°F to 140°F (-40°C to 60°C).

Example:40.6H-.15-120-8P (M x MS) Specifies a 0.15" ID Hose rated 40,600 PSI, 120" long, with 1/2" NPT connections, one end swivel.

BuTech Pressure Systems thermocouples permit quick and accurate temperature monitoring at any point in the system. Sheath lengths are standardized for use with any tee or cross shown in this catalog. Custom lengths are also available.

Standard Features:

• Standard quick connectors, both male and female, supplied with thermocouple
• Small diameter sheath to give fast response time
• Sheath has grounded junction
• 300 series SS sheath standard, other materials available on request
• Can be directly installed into any standard tee or cross
• Working pressures to 60,000 PSI (4,140 bar)
• 1/4" thermocouple supplied complete with collar and gland; other sizes supplied complete with 316SS adapter and necessary collars and glands to fit into standard connection
• Standard thermocouples available with either type J or type K calibration. Other types available on special order.
• Temperature at the tip of the thermocouple can range to 2,000°F (1,093°C)

	Catalog Number
Connection	Type J Calibration	Type K Calibration	MAWP
1/4" M/P	20TCJ4	20TCK4	20,000 PSI 1,380 bar
3/8" M/P	20TCJ6	20TCK6	20,000 PSI 1,380 bar
9/16" M/P	20TCJ9	20TCK9	20,000 PSI 1,380 bar
3/4" M/P	20TCJ12	20TCK12	20,000 PSI 1,380 bar
1" M/P	20TCJ16	20TCK16	20,000 PSI 1,380 bar
1/4" H/P	60TCJ4	60TCK4	60,000 PSI 4,140 bar
3/8" H/P	60TCJ6	60TCK6	60,000 PSI 4,140 bar
9/16" H/P	60TCJ9	60TCK9	60,000 PSI 4,140 bar

BuTech offers a line of gauges for indication of system pressure. All gauges are supplied with 1/4" H/P Coned-and-Threaded connections. Various adapters are available for use with medium and high pressure component systems.

Standard Features:

• Designed to Class AA standards: 1/4 of 1% accuracy
• Impact resistant aluminum case
• Black epoxy finish
• 316SS Bourdon tube and socket
• Solid front provides maximum safety with a solid wall between the Bourdon tube and window
• Blowout disc covers entire rear of gauge for pressure relief should Bourdon tube fail
• Other materials available on request
• Options include liquid filling and electric contact face

		Bottom Connected Gauges		Back Connected Gauges
Pressure Range	Pressure Divisions	Wall Mount	Flush Mount	Wall Mount	Flush Mount
1,000 PSI 70 bar	10 PSI 1 bar	1MG	1MG-PM	1MGB	1MGB-PM
2,000 PSI 140 bar	20 PSI 1 bar	2MG	2MG-PM	2MGB	2MGB-PM
3,000 PSI 210 bar	25 PSI 2 bar	3MG	3MG-PM	3MGB	3MGB-PM
5,000 PSI 340 bar	50 PSI 3 bar	5MG	5MG-PM	5MGB	5MGB-PM
7,500 PSI 520 bar	50 PSI 3 bar	7.5MG	7.5MG-PM	7.5MGB	7.5MGB-PM
10,000 PSI 690 bar	100 PSI 7 bar	10MG	10MG-PM	10MGB	10MGB-PM
15,000 PSI 1,030 bar	100 PSI 7 bar	15AG	15AG-PM	15AGB	15AGB-PM
20,000 PSI 1,380 bar	200 PSI 14 bar	20AG	20AG-PM	20AGB	20AGB-PM
30,000 PSI 2,070 bar	250 PSI 17 bar	30AG	30AG-PM	30AGB	30AGB-PM
50,000 PSI 3,450 bar	500 PSI 34 bar	50AG	50AG-PM	50AGB	50AGB-PM
75,000 PSI 5,170 bar	500 PSI 34 bar	75AG	75AG-PM	75AGB	75AGB-PM
100,000 PSI 6,890 bar	1,000 PSI 69 bar	100AG	100AG-PM	100AGB	100AGB-PM

]]> BuTech Adapters and Accessories Relief Valves Relief Valves

BuTech offers a complete line of adjustable high pressure relief valves with the following features:

• Two pressure ranges available:
  • 5,000 PSI to 20,000 PSI (345 bar to 1,380 bar) in 500 PSI (34 bar) increments
  • 15,000 PSI to 60,000 PSI (1,030 bar to 4,140 bar) in 500 PSI (34 bar) increments
• Multiple port and seal options available
• All stainless steel construction
• High flow capability

Tube OD	MAWP+	Cv*	Stem Style	2-way Straight	2-way Angle	3-way Two on Pressure	3-way One on Pressure	2-stem Manifold	2-way Angle Replaceable Seat
1/4"	20,000 PSI 1,380 bar	0.12	Vee Reg	30UV41V-SOG 30UV41R-SOG	30UV42V-SOG 30UV42R-SOG	30UV43V-SOG 30UV43R-SOG	30UV44V-SOG 30UV44R-SOG	30UV45V-SOG 30UV45R-SOG	30UV46V-SOG 30UV46R-SOG
3/8"	20,000 PSI 1,380 bar	0.23	Vee Reg	30UV61V-SOG 30UV61R-SOG	30UV62V-SOG 30UV62R-SOG	30UV63V-SOG 30UV63R-SOG	30UV64V-SOG 30UV64R-SOG	30UV65V-SOG 30UV65R-SOG	30UV66V-SOG 30UV66R-SOG
9/16"	20,000 PSI 1,380 bar	0.33	Vee Reg	30UV91V-SOG 30UV91R-SOG	30UV92V-SOG 30UV92R-SOG	30UV93V-SOG 30UV93R-SOG	30UV94V-SOG 30UV94R-SOG	30UV95V-SOG 30UV95R-SOG	30UV96V-SOG 30UV96R-SOG

Tube OD	MAWP+	Cv*	Stem Style	2-way Straight	2-way Angle	3-way Two on Pressure	3-way One on Pressure	2-stem Manifold	2-way Angle Replaceable Seat
1/4"	30,000 PSI 2,070 bar	0.08	Vee Reg	60UV41V-SOG 60UV41R-SOG	60UV42V-SOG 60UV42R-SOG	60UV43V-SOG 60UV43R-SOG	60UV44V-SOG 60UV44R-SOG	60UV45V-SOG 60UV45R-SOG	60UV46V-SOG 60UV46R-SOG
3/8"	30,000 PSI 2,070 bar	0.09	Vee Reg	60UV61V-SOG 60UV61R-SOG	60UV62V-SOG 60UV62R-SOG	60UV63V-SOG 60UV63R-SOG	60UV64V-SOG 60UV64R-SOG	60UV65V-SOG 60UV65R-SOG	60UV66V-SOG 60UV66R-SOG
9/16"	30,000 PSI 2,070 bar	0.14	Vee Reg	60UV91V-SOG 60UV91R-SOG	60UV92V-SOG 60UV92R-SOG	60UV93V-SOG 60UV93R-SOG	60UV94V-SOG 60UV94R-SOG	60UV95V-SOG 60UV95R-SOG	60UV96V-SOG 60UV96R-SOG