{{recommendedRegLangFull}}
{{title}}
{{currentRegion}} {{countryFromLanguage}} {{languageshort}}
Pneumatic and Hydraulic Driven Gas Boosters
Pressure On Demand
{{title}}
Why Use a Haskel Gas Booster
Haskel pneumatic and hydraulic driven gas boosters offer a flexible and efficient source for delivering high pressure gases.
- Oxygen or High Purity Cleaning: Haskel boosters are noted for their cleanliness and can handle pure gases such as oxygen without risk of any contamination.
- Multi-Staging Capability: For higher flow rates and pressures, beyond the capability of a single gas booster, one or more boosters of the same ratio may be plumbed in parallel and then in series with one or more boosters of the same ratio.
- High Flow Rates at High Pressures: When high flow rates at high pressures are needed, the booster can charge a receiver to an even higher pressure level, thus storing a volume of gas available for rapid release at a constant pressure through a pressure reducing valve.
- Cost Savings: Most industrial gases are commonly delivered at pressures of 2,000 – 2,600 psi in steel cylinders. If the gas is to be used well below the supply pressure, the pressurized supply is easily piped and controlled to the point of use with simple valving.
Pneumatic Driven Gas Booster Features
- Reliable, easy to maintain, compact and robust
- No heat, flame or spark risk
- Infinitely variable cycling speed and output
- Pneumatic driven models do not require electrical connection
- Easy to apply automatic controls
- No limit or adverse affect to continuous stop/start applications
- Seal systems designed for long working life
- No airline lubricator required
- Hydrocarbon free – separation between air and gas sections
- Pressures to 39,000 psi (2690 bar)
- Built-in cooling (most models)
- Standard & custom systems available
- Suitable for most gases
- Single, double acting, and two-stage models
- Ability to stall at any predetermined pressure and hold the fixed pressure without consuming power or generating heat
Model AG Single Stage, Single Acting
Model AG Single Stage, Single Acting, Flow Thru Piston
Model AGD Single Stage, Double Acting, Cooling Fins
Model AGD-4 (only) Single Stage, Double Acting, Cooling Jacket
Model AGD Single Stage, Double Acting, Cooling Jackets
Model AGT Two Stage, Cooling Fins
Model AGT Two Stage, Cooling Jackets
Model AGD-4 feeding into Model AGT-x/x
Multi stage - Two boosters. More than one booster of the same ratio may be used for each stage.
Blue=Compressed Air Yellow=Exhaust Drive Air Green=Gas Media
© 2021 Haskel
